1.芯模振动制管机高度机械化、自动化生产，生产效率高，劳动力占用少;
 
2.产量不受模型数量限制;
 
3.一种规格产品使用一套模型生产，产品尺寸精度极高;
 
4.采用干硬性混凝土，胶凝材料使用量少，成本降低;
 
5.干硬性混凝土、高频振动成型，混凝土不发生分层离析作用，管体混凝土强度高、匀质性好;
 
6.成型后，即时脱模，模型数量少，极大地降低了模型投入使用费用;
 
7.采用自然或低温(30-40℃) 蒸汽养护方法，节约能源;
 
8.可成型带底座及非圆形钢筋混凝土管;
 
9.生产环境改善，操作劳动强度低，文明生产;
 
10.可生产内壁嵌合腐蚀塑料薄膜管，工艺简单;
 
11.工序少，工艺生产线断、辅助吊运设备减少;
 
12.不产生废水泥浆，工业废渣少。 
 

1. Highly mechanized,automated product ion,highproduction efficiency, and low labor force occupancy; 
2. Production is not limited by the number of models; 
3. A specification product is produced using a set ofmodels with extremely high product size accuracy; 
4. Using dry hard concrete, the use of cementing materials 1S Smal I and the COst 1S reduced;
5. Dry hard concrete, high-frequency vibrat ion molding,concrete does not have stratificat ionsegregat 1on,tube ConCretestrength1Shigh,homogeneity is good; 
6. After molding, the number of models is small, whichgreatly reduces the cost of putting the model into use;
7. Adopt natural or low- temperature(30-40℃) steamConservation methods to save energy ; 
8. Formable belt base and non-circular reinforcedconcrete pipe; 
9. Improved production environment,loW operatinglabor intensity, civilized production;
10. Can produce inner wall embedded corrosion plasticthin film tube, the process is simple; 
11. There are few processes, process production
12. No waste water mud is produced, and there is littleindustrial waste.